2025 Limited Build - chrome delete & mods: Peak Lift Kit, Method +18 offset, Wildpeak AT4 285/70/18, Prinsu, RCI skid plates, heritage grill

[Unlimited4R]

Awesome build! Do you know your total overall height now with this wheels setup?

Hey @abejoharold - the current height is 75 3/4" (about 192cm) from the ground to the top of the Prinsu Pro roof rack. That will change (going up) once my King's arrive from Toytec and I throw the new springs on. I would anticipate another inch at least with the stiffer springs.

Sponsored

 

[Unlimited4R]

Update on my build progress, or lack thereof:

As a fan of King's after having them on my 5th gen build, it was a no-brainer to opt for a similar setup on my 6th gen. Ordered King's mid-February from Toytec, as well as UCAs from Elevate. Ordered the CBI super stock bumper and Superwinch 10k lb winch all awaiting the suspension install. Initially, I was given an estimated delivery of late March/early April. Followed up - mid-May. Reached back out to Toytec this week and they let me know that King Shocks are about 16-18 weeks out on mine (I got my order in early enough) but new orders will be coming with a 30-week lead-time.

In the meantime, I installed the Diode Dynamics D-Switch and cleaned up some of the wiring on the ditch and chase lights.

The wait (mid-July target) is probably going to result in me buying a few more RCI skid plates or something else.

 

[n1comedes]

Update on my build progress, or lack thereof:

As a fan of King's after having them on my 5th gen build, it was a no-brainer to opt for a similar setup on my 6th gen. Ordered King's mid-February from Toytec, as well as UCAs from Elevate. Ordered the CBI super stock bumper and Superwinch 10k lb winch all awaiting the suspension install. Initially, I was given an estimated delivery of late March/early April. Followed up - mid-May. Reached back out to Toytec this week and they let me know that King Shocks are about 16-18 weeks out on mine (I got my order in early enough) but new orders will be coming with a 30-week lead-time.

In the meantime, I installed the Diode Dynamics D-Switch and cleaned up some of the wiring on the ditch and chase lights.

The wait (mid-July target) is probably going to result in me buying a few more RCI skid plates or something else.

 

[n1comedes]

I recently purchased the Dswitch panel and C2 2.0 chase lights to work with my Baja Designs rock lights on my roof rack. I want to be able to control the left pair and right pair rock lights and pair of chase lights separately as well have all of them turn on when i unlock the car on the keyfob and when i open the door to exit. Is there a way to be able to accomplish all that? Looking for guidance. Thank you in advance

Sponsored