Sponsored

How much front lift requires UCAs?

sscarter

TRD Off-Road Premium
Active member
First Name
Steve
Joined
Oct 29, 2025
Threads
3
Messages
35
Reaction score
16
Location
Massachusetts
Vehicle(s)
2019 4Runner
If I lift the front 1.5 to 2 inches, do I need new UCAs? At what amount of lift are they advisable?
Sponsored

 

BonRunner

TRD Sport Premium
Well-known member
Joined
Dec 2, 2025
Threads
18
Messages
630
Reaction score
714
Location
Montana
Vehicle(s)
2026 TRD Sport Premium / WCP
Anything larger than 2.5" required a new, thicker UCA.

That's why the Westscott Designs Preload Collar lift doesn't required it.
 

3rdRunner

Trailhunter
Well-known member
First Name
Bill
Joined
Jan 13, 2026
Threads
7
Messages
257
Reaction score
196
Location
Texas
Vehicle(s)
Trailhunter
Agree with Bonrunner, 2.5 is a good rule of thumb. Anything over that and you’ll have to start considering multiple components in addition to the UCA such as tie rods, diff drop, brake line extensions, etc. Also as you lift and add bigger tires (I’m assuming that’s why you want the lift), consider bump stops -Timbren Active, Durobump, etc. That’ll help keep that bigger set-up from taking out your upper wheel well liner on compression.
 
OP
OP
sscarter

sscarter

TRD Off-Road Premium
Active member
First Name
Steve
Joined
Oct 29, 2025
Threads
3
Messages
35
Reaction score
16
Location
Massachusetts
Vehicle(s)
2019 4Runner
Agree with Bonrunner, 2.5 is a good rule of thumb. Anything over that and you’ll have to start considering multiple components in addition to the UCA such as tie rods, diff drop, brake line extensions, etc. Also as you lift and add bigger tires (I’m assuming that’s why you want the lift), consider bump stops -Timbren Active, Durobump, etc. That’ll help keep that bigger set-up from taking out your upper wheel well liner on compression.
I'm actually not planning on oversized tires; I'll drop down to 17" wheels & put on 285 tires for essentially same tire diameter as 265/18. I just want a modest lift for a bit more ground clearance, especially since 6th gen has a bit less than 5th gen.

Right now I'm thinking 2" front and 1.5" rear with Bilsteins.
 

shine

Trailhunter
Well-known member
First Name
Chris
Joined
Mar 8, 2025
Threads
4
Messages
279
Reaction score
267
Location
Seattle
Vehicle(s)
2025 4Runner Trailhunter, 2008 4Runner SR5
I'm actually not planning on oversized tires; I'll drop down to 17" wheels & put on 285 tires for essentially same tire diameter as 265/18. I just want a modest lift for a bit more ground clearance, especially since 6th gen has a bit less than 5th gen.

Right now I'm thinking 2" front and 1.5" rear with Bilsteins.
Adding a lift is not going to add ground clearance. The lowest point under your 4Runner is the rear pumpkin, and adding a lift is just going to push it further away from the body.
 
OP
OP
sscarter

sscarter

TRD Off-Road Premium
Active member
First Name
Steve
Joined
Oct 29, 2025
Threads
3
Messages
35
Reaction score
16
Location
Massachusetts
Vehicle(s)
2019 4Runner
Adding a lift is not going to add ground clearance. The lowest point under your 4Runner is the rear pumpkin, and adding a lift is just going to push it further away from the body.
Of course, but getting the body a bit higher helps with approaches, departures and humps.
 

3rdRunner

Trailhunter
Well-known member
First Name
Bill
Joined
Jan 13, 2026
Threads
7
Messages
257
Reaction score
196
Location
Texas
Vehicle(s)
Trailhunter
I'm actually not planning on oversized tires; I'll drop down to 17" wheels & put on 285 tires for essentially same tire diameter as 265/18. I just want a modest lift for a bit more ground clearance, especially since 6th gen has a bit less than 5th gen.

Right now I'm thinking 2" front and 1.5" rear with Bilsteins.
I don’t think new UCAs will be an issue for you. Let us see it when you have it put together - sounds like you have a good plan in mind.
 

Overland Toy

SR5
Active member
First Name
Nelson
Joined
Aug 19, 2023
Threads
4
Messages
38
Reaction score
35
Location
Rialto, Ca
Vehicle(s)
Cadillac ATS, 2gen Tacoma, 6G Bronco
I have a 3 inch lift on my Tacoma and I did use 1 inch Uni ball upper control arms from Fab tech
Sponsored

 
 







Top