Bike Rack installed on 6th gen - post your setups

[timelapse]

Here’s my setup. Yakima Stage 2 rack. I have a 2 bike add-on as well. I’ve also setup supplemental taillights and turn signals (found a good tutorial on YT).

When you’re wired into the tow harness, does it eliminate the auto trailer detection?

Sponsored

 

[time2playandy]

When you’re wired into the tow harness, does it eliminate the auto trailer detection?

I have an SR5, so no trailer detection. Kind of glad given all the comments about the challenges therein.

 

[gardner2303]

I just installed my 1up Equip'D and the hitch lock appears to be too short to allow the lock to turn. I am having to use the wheel lock I also got for now and reached out to customer service. Anyone else with this issue?

 

[brumey]

Are you saying the hitch is wider than standard, not allowing the weird and not very secure 1UP locks to work?

Picture 3 seems to look like it works.

I have never liked the 1up lock. Rack is good. Always been tempted to drill through the hitch and 1up for a real lock.

 

[timelapse]

I just installed my 1up Equip'D and the hitch lock appears to be too short to allow the lock to turn. I am having to use the wheel lock I also got for now and reached out to customer service. Anyone else with this issue?

I had the same issue. My solution was using one of the longer ones I had for the bikes. With a few washers, works great. Now I’m short on a lock for the bikes, but I’ll get that sorted later.

 

[time2playandy]

I have an SR5, so no trailer detection. Kind of glad given all the comments about the challenges therein.

Check that. It did detect a ‘trailer’ this morning on startup. With the rack in the vertical stowed position I assume the camera triggered it.

 

[gardner2303]

I had the same issue. My solution was using one of the longer ones I had for the bikes. With a few washers, works great. Now I’m short on a lock for the bikes, but I’ll get that sorted later.

Glad to know I am not the only one. Hopefully their customer service will just send me another wheel lock if they don't have a slightly longer one designed for this type of receiver

 

[gardner2303]

Are you saying the hitch is wider than standard, not allowing the weird and not very secure 1UP locks to work?

Picture 3 seems to look like it works.

I have never liked the 1up lock. Rack is good. Always been tempted to drill through the hitch and 1up for a real lock.

Correct. The lock they sent is probably ~1/2" too short to work. I can get the lock on the rod.. but not far enough to allow the key to actually lock the rod down. That 3rd picture was using the accessory wheel lock I purchased which I am now using as a temporary solution

 

[brumey]

I have the longer locks designed for securing bike to frame I wonder if 1up will do a slightly longer for the Toyota. Seems like a hitch would be a standard size snd if so, Toyota went non-standard.

 

[gardner2303]

Alright, confirmed with 1UP that what they sent will not work. Their only solution was for me to buy a replacement pin after trying to get them to just send one as they did not clearly outline this potential issue before I purchased. The email agent didn't help at all so I called and that person at least gave me a free ship code.

What you will need is SKU 260027 Wheel Lock (QR/HD) that has a usable length of 3.9". What they ship only has a usable length of 3" which is about 0.5" too short for this 4Runner

https://1up-usa.com/product/1-4-turn-replacement-pin

 

[brumey]

Great info. I found when purchasing accessories, they were far from helpful. I am checking my lock now but I beleive I am in the same situation.

I also have all my locks using the same key. I bet they will not do that on the nee lock.

 

[timelapse]

Great info. I found when purchasing accessories, they were far from helpful. I am checking my lock now but I beleive I am in the same situation.

I also have all my locks using the same key. I bet they will not do that on the nee lock.

Take note of the number on your matching key set. Ask if they can give you more with that same lock number. I believe they’re 1-25.

 

[brumey]

Looks like I am buying just the rod end of the lock which should use the same lock I have now.

i ordered it and should receive it Friday.

I want to test fit the rack, bikes, tilting, etc. its been a while since I mounted it. Hopefully I will have access to the cargo area without an extended hitch or swing out.

 

[vready]

Here's a look at my setup. This is the 1Up Super Duty rack with two trays. I encountered the same issue with the security lock being too short for the double-walled design of the 4Runner hitch receiver. 1Up is sending me one of the bike locks as others have described.

 

[vready]

And like others, I'm getting the message, "Trailer detected. Please Confirm" with the rack installed, and then the Pre-Collision system is randomly braking when I back up. Not great...

Toyota definitely needs to add a "Bike Rack" mode that temporarily disables these features.

Sponsored