Caliraised and ddSS40

[miggonza]

I have a 25 4Runner and installed a caliraised roof rack on it. I also purchase a diode dynamic SS40 light bar to go on it. My dilemma is the bracket to the light will only use one screw to hold the bar. Has anyone made or bought an adapter to make it work better.

Sponsored

 

[ttominator]

I have the caliraised 40" light bar mounted down behind the drop down wind deflector. Let me know if you want some pictures of it.

 

[miggonza]

I have the caliraised 40" light bar mounted down behind the drop down wind deflector. Let me know if you want some pictures of it.

Yes if you don’t mind.

 

[ttominator]

Yes if you don’t mind.

 

[Archer]

Will these work

https://caliraisedled.com/products/sherpa-roof-rack-dual-function-light-bar-mounting-brackets


.

 

[ysv85]

I have the caliraised 40" light bar mounted down behind the drop down wind deflector. Let me know if you want some pictures of it.

Please post pics

 

[ysv85]

Where are the brackets from?

 

[miggonza]

I’ll have to check to see how these diode dynamics one fit and hold first. Then I might try another set of brackets

 

[ysv85]

I’ll have to check to see how these diode dynamics one fit and hold first. Then I might try another set of brackets

I am on the same boat here brother. Let me know

 

[ttominator]

Where are the brackets from?

Brackets are from Cali Raised.

 

[miggonza]

So I had the universal brackets that came with the SS40 modified by a welder I work with to use both mounting bolts. So far It lines up great. Gonna mount it this weekend when I get some time.

 

[mfoga]

Hope you never want to adjust the light. I would have ran it as a single hole like pretty much all the other lights attach. I am guessing the double attachment is for mounting the backet vertically only.

 

[ysv85]

So I had the universal brackets that came with the SS40 modified by a welder I work with to use both mounting bolts. So far It lines up great. Gonna mount it this weekend when I get some time.

Paint that sucker black, install, share pics and let us know how it worked out brother

 

[ysv85]

Hope you never want to adjust the light. I would have ran it as a single hole like pretty much all the other lights attach. I am guessing the double attachment is for mounting the backet vertically only.

You have a valid point there ngl

 

[miggonza]

Bracket works great and I can adjust the angle as needed.

Sponsored