- Thread starter
- #1
Decided to try wrapping the dash trim with some topo vinyl. I wanted to do a full wrap as opposed to the overlay kits that I've seen, so I removed the trim for this.
There are very small areas where you can see that its a wrap (tiny creases or bubbles) but overall I would say it came out pretty well. Relatively easy to do if you're familiar with working with vinyl and the trim removal was easy. You do have to remove the nav screen but surprisingly it's just 4 bolts behind a trim piece that pops right off, so that wasn't much of a hassle.
I haven't done the door trim as I'm not sure how ill work around the raised TRD lettering. We'll see about that. Let me know what you guys think!
Also, wrap is from beyond wraps: https://www.beyondwraps.com/products/vinyl-by-the-foot-custom-wraps
There are very small areas where you can see that its a wrap (tiny creases or bubbles) but overall I would say it came out pretty well. Relatively easy to do if you're familiar with working with vinyl and the trim removal was easy. You do have to remove the nav screen but surprisingly it's just 4 bolts behind a trim piece that pops right off, so that wasn't much of a hassle.
I haven't done the door trim as I'm not sure how ill work around the raised TRD lettering. We'll see about that. Let me know what you guys think!
Also, wrap is from beyond wraps: https://www.beyondwraps.com/products/vinyl-by-the-foot-custom-wraps
Sponsored
Last edited: