Backup camera relocation kit development - need tester for free kit

[GGOffroad]

Katie from GGOffroad here. We make camera relocation harnesses for the Tundra and Tacoma, and I've been reading Toyota's connector documentation for the 4Runner because this keeps coming up.

We have confirmed that the mirror end connector is the same as what's used for Tacos and Tundras. The camera end is the one I can't confirm. I haven't been able to read the 4Runner's camera side inner mirror connector off Toyota's own pages yet, but it seems highly likely we have a connector that will work for 4Runner.

Same with the backup camera the picture is better. Your rear camera connector is 90980-12F78 gray, same as Tundra, Tacoma and GX 550. Our kit likely works for y'all.

Based on my reading, we likely have the connectors needed to build a relocation kit for the 4Runner. What I need is a vehicle. If anyone here is willing to pull a couple of connector photos and test fit a harness, I'll send a free kit for the help. Bonus if you're near the Denver/Boulder metro area where we could meet in person with Austin - our engineer.

[email protected] or reply here.

Sponsored

 

[Mad Ghost]

Katie from GGOffroad here. We make camera relocation harnesses for the Tundra and Tacoma, and I've been reading Toyota's connector documentation for the 4Runner because this keeps coming up.

We have confirmed that the mirror end connector is the same as what's used for Tacos and Tundras. The camera end is the one I can't confirm. I haven't been able to read the 4Runner's camera side inner mirror connector off Toyota's own pages yet, but it seems highly likely we have a connector that will work for 4Runner.

Same with the backup camera the picture is better. Your rear camera connector is 90980-12F78 gray, same as Tundra, Tacoma and GX 550. Our kit likely works for y'all.

Based on my reading, we likely have the connectors needed to build a relocation kit for the 4Runner. What I need is a vehicle. If anyone here is willing to pull a couple of connector photos and test fit a harness, I'll send a free kit for the help. Bonus if you're near the Denver/Boulder metro area where we could meet in person with Austin - our engineer.

[email protected] or reply here.

I would probably be willing to take mine apart, I helped Cali Raised and AJD Designs protype 6th gen products already.

 

[mcd_ovrlnd]

I might be willing to give it a go. I have a Rig’d Ultraswing so hoping for a camera relocate for the 4R6G.

 

[3rdRunner]

Happy to help out. This is the fix I’ve been waiting for before adding spare carrier.

 

[Ramrod113]

Email sent.

 

[GGOffroad]

Four takers in a day, thank you all.

One more thing that'll help us pick. Is anyone local to Denver/Boulder, or comfortable with a multimeter? If the kit doesn't work out of the box, we may ask you to run a few tests on the connectors so we can figure out why.

We'll follow up with everyone directly this week.

Katie, GG Offroad

 

[GGOffroad]

I'll follow up with a quick note. We got pictures of the connectors at the camera, but are looking for someone to help get pictures under the headliner. Pic has details. This video shows the process for getting under there:

Sponsored