2025 Limited Build - chrome delete & mods: Peak Lift Kit, Method +18 offset, Wildpeak AT4 285/70/18, Prinsu, RCI skid plates, heritage grill

[Unlimited4R]

Awesome build! Do you know your total overall height now with this wheels setup?

Hey @abejoharold - the current height is 75 3/4" (about 192cm) from the ground to the top of the Prinsu Pro roof rack. That will change (going up) once my King's arrive from Toytec and I throw the new springs on. I would anticipate another inch at least with the stiffer springs.

Sponsored

 

[Unlimited4R]

Update on my build progress, or lack thereof:

As a fan of King's after having them on my 5th gen build, it was a no-brainer to opt for a similar setup on my 6th gen. Ordered King's mid-February from Toytec, as well as UCAs from Elevate. Ordered the CBI super stock bumper and Superwinch 10k lb winch all awaiting the suspension install. Initially, I was given an estimated delivery of late March/early April. Followed up - mid-May. Reached back out to Toytec this week and they let me know that King Shocks are about 16-18 weeks out on mine (I got my order in early enough) but new orders will be coming with a 30-week lead-time.

In the meantime, I installed the Diode Dynamics D-Switch and cleaned up some of the wiring on the ditch and chase lights.

The wait (mid-July target) is probably going to result in me buying a few more RCI skid plates or something else.

 

[n1comedes]

Update on my build progress, or lack thereof:

As a fan of King's after having them on my 5th gen build, it was a no-brainer to opt for a similar setup on my 6th gen. Ordered King's mid-February from Toytec, as well as UCAs from Elevate. Ordered the CBI super stock bumper and Superwinch 10k lb winch all awaiting the suspension install. Initially, I was given an estimated delivery of late March/early April. Followed up - mid-May. Reached back out to Toytec this week and they let me know that King Shocks are about 16-18 weeks out on mine (I got my order in early enough) but new orders will be coming with a 30-week lead-time.

In the meantime, I installed the Diode Dynamics D-Switch and cleaned up some of the wiring on the ditch and chase lights.

The wait (mid-July target) is probably going to result in me buying a few more RCI skid plates or something else.

 

[n1comedes]

I recently purchased the Dswitch panel and C2 2.0 chase lights to work with my Baja Designs rock lights on my roof rack. I want to be able to control the left pair and right pair rock lights and pair of chase lights separately as well have all of them turn on when i unlock the car on the keyfob and when i open the door to exit. Is there a way to be able to accomplish all that? Looking for guidance. Thank you in advance

 

[Unlimited4R]

I recently purchased the Dswitch panel and C2 2.0 chase lights to work with my Baja Designs rock lights on my roof rack. I want to be able to control the left pair and right pair rock lights and pair of chase lights separately as well have all of them turn on when i unlock the car on the keyfob and when i open the door to exit. Is there a way to be able to accomplish all that? Looking for guidance. Thank you in advance

Hey @n1comedes - To your questions regarding the D-Switch, yes, you can have the rock and chase lights on the left and right wired up separately. Within the D-Switch controls, each light can be wired to one of the 8 outputs that tie to the switch control buttons. Keep in mind, depending upon how many other things you wish to control with the switch panel, this will determine your button configuration. I have both chase lights running into one button for mine, both a-pillar lights on one button, etc.

Now, for the remote control with the key fob, I believe there's a way, but that might require a deeper dive on this forum and others to ensure you're aligning the right wiring into this. You may want to start a new/separate thread on this topic and see what insight others can give you for that.

Sweet build!

Sponsored