SUPERSONIC RED Photos 4Runner 6th Gen (2025+)

[4running]

Supersonic Red SR5 on:

-12 offset Falcon Off-Road T6 Diablo Wheels in matte bronze (17x9 -12mm offset)
Tires are Cooper Evolution M/T
Lift kit unknown

Sponsored

 

[Meganotch]

We are loving our ORP in red!

 

[MountainGeorge]

Supersonic Red Limited Trim 2025 4Runner 6th gen with trailer in tow.

Very Nice ! ! ! My Supersonic Red SR5 will be arriving in two weeks and it will be towing our GRAND DESIGN 17MKE RV this Summer and Fall. Thanks again, TOYOTA for increasing the tow capacity to 6,000 pounds on the 6th Generation 4RUNNERS !

 

[JR1]

Here’s a few pics of my Supersonic red after the truck is all cleaned up.

 

[Supersonic Red 4runner]

Here’s a few pics of my Supersonic red after the truck is all cleaned up.

I just ordered the same running boards from Toyota

 

[JR1]

I just ordered the same running boards from Toyota

They were on the truck as a PIO. I could take or leave them but my wife cleans her shoes with them if it’s snowing. They don’t look too bad as they are pretty narrow.

 

[Supersonic Red 4runner]

They were on the truck as a PIO. I could take or leave them but my wife cleans her shoes with them if it’s snowing. They don’t look too bad as they are pretty narrow.

Agreed. I am my another idea for blocking rocks chips and parking’s door dents Do you happen to have more pictures of your ride

 

[JR1]

Agreed. I am my another idea for blocking rocks chips and parking’s door dents Do you happen to have more pictures of your ride

What would you like to see?

 

[Supersonic Red 4runner]

My supersonic Red.

TRD Pro wheels + GoodYear Territory R/T 265/70/18 (Tacoma TRD Pro stock setup)
Stock suspension, no lift
Ride feels softer than stock TRD Sport wheels & tires

 

[Vlad23i]

RRW wheels 17x8.5 et0
305/70/17 toyos
Westcott level kit

Will be changing up to 35s
Feel like the 305s look a tad too small.

 

[Doofy]

Here’s some more pics that I took when I first took delivery. I added a pic of the cast aluminum running boards.

Are the cast boards functional for getting in/out? Thinking of kids

 

[JR1]

These are 2025 TRD Pro 18” wheels with Mickey Thompson Baja Boss AT tires.

The tires are 265/65/18 which is almost the same size as the stock Geolanders at 265/55/20.
No lift or leveling kit.

Before (stock TRD Sport wheels)
20x8" inch machine finished alloy wheels
31.5" (265/55R20) Yokohama Geolandar A/T G015 tires

 

[Supersonic Red 4runner]

Update pictures with TRD Pro grille & Wheels on my supersonic Red

 

[Trailhunter4R]

Not my build but sharing for anyone looking for an aggressive wheel and tire fitment.

17x9 RockTrix - 12mm offset bronze wheels (Style RT107)
295/70/17 Mickey Thompson Baja tires (33")
Westcott lift kit

According to the owner: Had to give her a trim a little to make it all work, slight rub against the safety bar, easily removed only three bolts, but pretty decent rub against the bumper. Gonna dremel it tomorrow, won't even notice honestly.

 

[MedicMcLovin]

Hey everyone! Below is the build, so far, for my Super Sonic Red TRD ORP hybrid.

-Premium Horn swap
--Videos below from before and after install

-Westcott 2.5" lift

-RockTrix RT107 Six Split Spoke Mesh 17x9 wheels with a -12mm offset

-Originally had 295/70/17 Mickey Thompson Baja Boss ATs but I just recently moved down to 285/70s. I had to trim about a 1/4" off of the front bumper, cut some of the fender liner on both the front and back end of the fender, as well as removal of the crash bar. I still had some slight rubbing on full lock and reverse wasn't great. Once I went down to the 285, all rubbing as since ceased. I have not tested extreme flex, but I don't do any significant off roading that makes me leery about it. Positive to the minor downsize was that I dropped about 100# off of the vehicle weight going from 10 ply down to a 3 ply tire. Ride is SIGNIFICALLY smoother and the MPGs increased back up again.

-LaserFit liners throughout
-REDTIGER dash cam with front and rear cameras
-55% windshield, 20% front windows, and 5% rear window tint
-American Flag window vinyl
-Interior storage options as pictured below. The cup holder was purchased from a member in this forum.

I have the SXTH Element CAI on preorder, should be here at the end of September. Also looking into the NYTOP extended fender flares. I would like to do the PRO tail light swap out and possibly the AlphaRex headlights.

Sponsored