Seat position doesn’t return ORP

[mfoga]

So based on my understanding seat a steering wheel position can be set by both the key or the buttons on the door. I have it set to tilt the wheel and partially move the seat to exit. It doesn’t move back. I have also set it to use key (I think) and I have set the buttons on door. If it moves back to to assist with exit it doesn’t back I have to reset using seat controls. Neither the profile for key or saved position on door moves it back. The steering wheel moves as expected. Anyone else experiencing this? Am I doing something wrong or do I need to already take it in?

Sponsored

 

[RogueWarrior65]

Have you calibrated the seat? There's a procedure for that. IIRC, you can tell if it's not if it beeps while you're moving the seat.

What I have noticed is that it's supposed to position everything when you either start the vehicle or plug the seat belt in but sometimes it forgets to do that.

 

[mfoga]

It beeps when you move it. I looked through the book and never saw anything about “Calibration.” Quick google and following that procedure and now it work. So dealership didn’t do something, I did think it was weird it beeped when you moved it.

Thank you.

 

[Nodak]

It beeps when you move it. I looked through the book and never saw anything about “Calibration.” Quick google and following that procedure and now it work. So dealership didn’t do something, I did think it was weird it beeped when you moved it.

Thank you.

since the dealer forgot to do the PDI correctly, i would check the other things that should have been done in case they missed more than just the seat initialization.

over inflated tires is also a big miss during PDI

 

[Nodak]

forgot to add, the settings that should have been initialized during PDI are in the manual

Sponsored