Anyone tried this Anytime front bumper camera on SR5?

[jcaluya27]

The Beatsonic kit works. A plain old NTSC camera displays right on the factory screen.

There are a few annoyances though. They didn't hook up the backlight wires even though they could have, the pins are available in one of the connectors they tap into, and the camera turns itself back off after only 15 seconds.

But the important thing works.

If you are able could you please show a video of how it works. I’m curious about how it works and interested in buying the kit. Thanks.

Sponsored

 

[828findadventure]

I have received the Beat Sonic front camera harness "plug and play" along with a front camera that I will be integrating into the factory camera mounts. I will update you all when the weather is more forgiving and I can start the install. https://www.beatsonicusa.com/products/cs15?variant=46414827913367

 

[bkw777]

If you are able could you please show a video of how it works. I’m curious about how it works and interested in buying the kit. Thanks.

well you see...

 

[bkw777]

scanned the paper manual since it's not on their web site yet

 

[jcaluya27]

well you see...

Oh wow lol

 

[bkw777]

to splice in the backlight

the diagram with blue & gray is for the other anytime backup kit, it's just to show exactly where pins 24 and 25 are

The button supplied with the beatsonic kit is a different model of button, a momentary instead of push on push off, and has different wire colors and pinout. So pin 25 goes to yellow on the beatsonic button, and pin 24 goes to black.

Note, backlight negative is not the common frame gnd.

Sponsored