35’s with 0mm Offset Wheels (bumper trimming?)

[gadawgs27]

Hey everyone,

Has anyone fit 35x12.5R17 or 315/70R17 on with 0mm offset wheels? I’m currently running 295/70R17 Baja Boss on Icon Compression wheels (0mm offset) and Readylift 2.5" lift.

I already took off the crash plates and pushed the fender liner forward, just don’t want to trim any bumper.

Sponsored

 

[alpa_chino]

Hey everyone,

Has anyone fit 35x12.5R17 or 315/70R17 on with 0mm offset wheels? I’m currently running 295/70R17 Baja Boss on Icon Compression wheels (0mm offset) and Readylift 2.5" lift.

I already took off the crash plates and pushed the fender liner forward, just don’t want to trim any bumper.

Interested as well. Im probably going with the same size/offset and tire size

 

[Takumi07]

Hey everyone,

Has anyone fit 35x12.5R17 or 315/70R17 on with 0mm offset wheels? I’m currently running 295/70R17 Baja Boss on Icon Compression wheels (0mm offset) and Readylift 2.5" lift.

I already took off the crash plates and pushed the fender liner forward, just don’t want to trim any bumper.

Are you rubbing with the front bumper at full lock?

 

[gadawgs27]

Are you rubbing with the front bumper at full lock?

Not rubbing right now, but I had to trim off the plastic clip that was holding the front fender liner.

 

[alpa_chino]

Not rubbing right now, but I had to trim off the plastic clip that was holding the front fender liner.

How much did you end up trimming? any pics? went with 35x11.5 and ill probably have to trim some as well. Pushed the liner up but still have some rub

 

[gadawgs27]

How much did you end up trimming? any pics? went with 35x11.5 and ill probably have to trim some as well. Pushed the liner up but still have some rub
[/

 

[gadawgs27]

I ended up getting a whole new setup lol. 17x8.5 Icon Recon SLX +25 mm offset with 35x12.5R17 Nitto Recon Grapplers

 

[anothy]

Hey, doing some research for my setup. You had previously on a 295/70R17 +0 offset with minor trimming, crash plate delete and fender liner tuck? Is that correct?

Sponsored