Sponsored

Before upgrading the audio system, try replacing the front dash speaker first (SR5)

IRFAN0922

SR5
Well-known member
First Name
irfan
Joined
Jul 16, 2026
Threads
10
Messages
71
Reaction score
58
Location
22033
Vehicle(s)
2026 Toyota 4Runner SR5
Before spending money on upgrading any audio equipment in the 6th Gen 4Runner, I would recommend trying one simple thing first: replace the front dash speaker.

In my experience, this makes a huge improvement in sound quality. In my video, I’m showing the 5th Gen 4Runner SR5 speaker that I connected in the dash. It is not necessarily super loud, but the sound quality is noticeably better.

You will probably need to adjust the bass, mid, and treble settings based on your personal taste. I actually prefer having more sound coming from the rear speakers, so I keep my settings that way.

As for the speakers, Kicker is just one option. I think Pioneer or Kenwood might be a better match, but I was trying to keep this upgrade on a budget, which is why I went with Kicker.

So, before doing a complete audio system upgrade, try replacing the front dash speaker first. It’s a simple and relatively inexpensive change that can make a big difference.

Thanks!
Sponsored

 

CowboyFan

TRD Off-Road Premium
New member
First Name
Lloyd
Joined
Sep 26, 2025
Threads
1
Messages
4
Reaction score
24
Location
Choctaw, Oklahoma
Vehicle(s)
2025 4 Runner
Took your advice and installed these in my 26 Tacoma TRD Off Road with the base sound system. They made a big improvement.
Glad I still read the 4 Runner 6G Forum. I sold my 25 4 Runner TRD Off Road Premium and got the Tacoma. A truck suits my needs better.
 

A3REDT

SR5
New member
First Name
A3REDT
Joined
Nov 20, 2026
Threads
0
Messages
1
Reaction score
1
Location
Tennessee, USA
Vehicle(s)
2026 4RUnnER SR5 2WD, 2015 Camaro 1SS
Joined this forum to post my experience here and say thanks to the O.P.!

TL;DR: If you are at all dissatisfied with the sound in your base audio 4Runner, give this a shot before spending money elsewhere.

Parts:
I went through Crutchfield (they'll tell you what speakers fit and include the adapter harness you need free if you order through them) and ordered the Rockford Fosgate R14X2. Crutchfield included the Metra 72-8109 Speaker Wiring Adapters free.

Selection process:
I've ordered through Crutchfield before and been a big fan of their service, selection, and website, so that was a given for me. I like my audio smoother, so was looking for a silk-dome tweeter in particular, in a coaxial to keep the midrange in the dash as well. I wasn't interested in a separate tweeter mount, so I was avoiding any component sets, although I am sure those could deliver an even better result. In my research, I found that the dash and door woofers are run in parallel, and there are a few reports of impedance issues with lower-ohm speakers. I wasn't able to find any options that matched the OEM 8ohm rating, so I just aimed for the highest ohm speakers I could find, along with the lowest sensitivity to keep the dash speakers from overpowering the rest of the system. TL;DR: the Rockford speakers sound great in the system to me.

Removal Process:
I watched the linked video in the O.P., and read through the instructions Crutchfield emailed me after I placed my order. I already had some trim tools, so I took the narrowest wedge and used it to pry near the clips, popping off the cover. Then I used a stubby 10mm socket/ratchet to loosen and remove the two bolts. It took some careful orienting to get the OEM clip to an easy point to hit the release tab, but once that was done the original speakers were out. 10 minutes for both sides including walking back and forth from my tools in the garage to the driveway.

Install process:
I connected the Metra harness to my speakers, the speakers and the harness both had thicker/thinner sides so it was easy to figure out which one went where. Once connected to the harness, I plugged the speakers into their respective sides. When I went to install the speakers in their openings was when I ran into the only issue I had with this install -the 4" speakers had tabs that interfered with the dash. Fortunately the Rockford speakers had tabs that were set up to be bent out of the way quite easily, so I bent one tab on the passenger side up to follow the dash, and one tab on the driver's side down to fit under the dash. After that I was able to align and screw in both bolts to secure the speakers. Installing the OEM covers over top was easy with no interference.

Results:
I had been growing more and more dissatisfied with the OEM sound. At low volumes I couldn't hear anything, and at high volumes the vocals were still underwhelming. Tweaking the factory equalizer didn't get me where I was looking for, and I was not alone in thinking that, as most passengers would remark that they couldn't hear the music, and were surprised that turning the volume up didn't seem to help! The change was immediately noticeable to myself having made the change, and the others that have been in the car with me within the past week or so, have *unprompted* (I didn't mention to anyone I had changed the speakers, TBH embarrassed I am having to upgrade parts on a 6-month-old car) remarked about how great the sound from the radio was. HIGHLY recommend making this change if you have anything you have the base audio and are looking for an improvement.

Deeper analysis:
I've never had a car without a factory component tweeter. I'd never thought about that until I started analyzing this system, and why it bothered me so much compared to the cars I had before. It had 8 speakers compared to my 6-speaker Silverado/Camaro sound systems, so it wasn't the number of speakers. It didn't help that the factory midrange was cheap paper, but as I pulled them out, and discovered how dramatically a $50 speaker improved the system, I was genuinely annoyed that an auto manufacturer would consider that adequate in any modern vehicle, let alone a $40k+ SUV.

Future improvements:
I am happy with the sound for now!

But I also have a Kicker Key 180.4 amp/DSP already in the garage from a few cars back and already have a bass blocker for the dash and treble blocker for the door woofers on order to help get some separation between the two and then level out some of the peaks that the two full-range drivers are currently creating. Especially in the 200-400Hz range I am noticing the new dash speakers are playing down to lower frequencies than before and interfering with the door woofers.

TL;DR: If you are at all dissatisfied with the sound in your base audio 4Runner, give this a shot before spending money elsewhere.
Sponsored

 
 







Top