Upgraded my behind the grill lights to the New Baja Designs Squadron 2 Pro's!!!

[Franco]

Okay now suffering from garage jealousy as well.

Haha thanks - Ya just purchased "my retirement home" in So Utah and the RV garage was a must have!

Sponsored

 

[pistol]

Thanks! I bought the Auxbeam Switch Panel from Amazon which allows you to only need to put one wire through the firewall which is probably the hardest part.

Nice, what are they mounted to? Have a pair of SSC1 fogs laying around I want to mount in the same location

 

[Armbender]

Looks awesome! Which wiring harness did you get to connect to the AUXBEAM?

 

[Franco]

Looks awesome! Which wiring harness did you get to connect to the AUXBEAM?

Thank you!
So with the Squadron Pros, I included the wiring harness but instead wired each light directly from the connector to the Auxbeam.
In retrospect, I should have just used the wiring harness and manually connected the wires that were included in the harness (For some reason I didn't want to destroy the harness)

 

[Armbender]

Thank you!
So with the Squadron Pros, I included the wiring harness but instead wired each light directly from the connector to the Auxbeam.
In retrospect, I should have just used the wiring harness and manually connected the wires that were included in the harness (For some reason I didn't want to destroy the harness)

Okay great to know

I want to try and wire it so the Backlight function comes on with the DRLs

 

[Franco]

Okay great to know

I want to try and wire it so the Backlight function comes on with the DRLs

That would be cool. I just used one of the switches on the Auxbeam

 

[Armbender]

Did you dremel cut the grill section you removed that were blocking the lights?

 

[Franco]

Did you dremel cut the grill section you removed that were blocking the lights?

Sawzall and a file to clean it up. you can use tin snips too

Sponsored