- Joined
- Aug 26, 2025
- Threads
- 8
- Messages
- 21
- Reaction score
- 9
- Location
- Clearwater
- Vehicle(s)
- 4runner TRD Sport
- Thread starter
- #1
Should I be concerned about this?
I had the Westcott Designs preload kit as well as new wheels and tires. Someone posted about reverse rake, so I measured mine distance from the bottom of the fender to ground measurement:
Front Driver Side - 38 3/8”
Front Passenger Side - 39 3/8”
Rear Driver Side - 37 1/4”
Rear Passenger Side - 38”
So it look like the passenger side is an inch higher, and the front is over an inch taller.
Is this an issue? Reverse rake?
I had the Westcott Designs preload kit as well as new wheels and tires. Someone posted about reverse rake, so I measured mine distance from the bottom of the fender to ground measurement:
Front Driver Side - 38 3/8”
Front Passenger Side - 39 3/8”
Rear Driver Side - 37 1/4”
Rear Passenger Side - 38”
So it look like the passenger side is an inch higher, and the front is over an inch taller.
Is this an issue? Reverse rake?
Sponsored
