Anyone replace front & rear valence on 2025 Gen6 Limited with black ones from Platinum?

[ROBERT18452]

Hello from rainy Pennsyltuckey,

Has anyone replaced the front & rear valence on their '25 Gen6 Limited with black ones from Platinum?

Updated with parts number info from @JayTech

If you are talking about the front valance and the middle section of the rear bumper that are silver, and are looking for the black ones on the Platinum, these are the part numbers:​

​

Front: 53911-35510​

Rear: 52169-35100​

Sponsored

 

[Limited Pearlwhite]

I’m interested in this also just have a hard time decoding stupid Toyota part numbers

 

[mjfloyd1]

The wheels, grilles and the front and back areas under the bumpers are the same as the platinum except silver/ chrome so I’d personally just hyper dip / plastidip all those parts to shiny black. You could powder coat the wheels if you want it more permanent.

 

[JayTech]

I’m interested in this also just have a hard time decoding stupid Toyota part numbers

I can assist with that. I work in parts at a Toyota dealer. If you are talking about the front valance and the middle section of the rear bumper that are silver, and are looking for the black ones on the Platinum, these are the part numbers:
Front: 53911-35510
Rear: 52169-35100

 

[ROBERT18452]

I can assist with that. I work in parts at a Toyota dealer. If you are talking about the front valance and the middle section of the rear bumper that are silver, and are looking for the black ones on the Platinum, these are the part numbers:
Front: 53911-35510
Rear: 52169-35100

Thank you Jay!

 

[Limited Pearlwhite]

Thanks!

 

[bkw777]

What is the part number for the plain matte black SR5 part?
Anyone who installed a metal bumper want to sell me their original plastic part?

Stuffed it into a trailer tongue because I don't have any kind of front camera or front parking sensors and you can't see at all down there.

 

[JayTech]

What is the part number for the plain matte black SR5 part?
Anyone who installed a metal bumper want to sell me their original plastic part?

Stuffed it into a trailer tongue because I don't have any kind of front camera or front parking sensors and you can't see at all down there.

I believe it should be 53911-35500. From what I can see there only seem to be 3 options, the flat black, gloss black, or silver. That should be the part number for the flat black one.

 

[Griffin27]

I just had a shop paint mine glossy black. Removing the front and rear would have been a pain in the a#$.

 

[bkw777]

I believe it should be 53911-35500. From what I can see there only seem to be 3 options, the flat black, gloss black, or silver. That should be the part number for the flat black one.

Thank you sir!

 

[theapoco01]

I believe it should be 53911-35500. From what I can see there only seem to be 3 options, the flat black, gloss black, or silver. That should be the part number for the flat black one.

Hi Jaytech, do you happen to know the part number for the ORP flat black front and rear valances? Is it different from the SR5? I actually prefer the flat black over the platinum's glossy black.

Sponsored