Sponsored

Recent content by Daronc

  1.

    Underground SR5 on 2.5" ReadyLift lift kit, Method 703 +0 offset and Nitto Recon Grappler 285/70/17

    Nicely done, was anything added to the rear for lift.

  2. OME MT64 Old Man Emu Suspension w/ UCA (Part #2135K) + Timbren Active Off-Road Bumpstops -- Installation & Review...by Van Solo

    Thanks for the measurements. It looks like you got 2” over stock height. Was the the clip set on the highest setting

  3. OME MT64 Old Man Emu Suspension w/ UCA (Part #2135K) + Timbren Active Off-Road Bumpstops -- Installation & Review...by Van Solo

    Great write-up and your 4Runner, nicely done! Would you be able to measure from the center wheel hub to the bottom of the fender flare as I would like to see what was the actual height you obtained

  4. OME MT64 Old Man Emu Suspension w/ UCA (Part #2135K) + Timbren Active Off-Road Bumpstops -- Installation & Review...by Van Solo

    Great write-up and your 4Runner, nicely done! Would you be able to measure from the center wheel hub to the bottom of the fender flare as I would like to see what was the actual height you obtained

  5. OME MT64 lift kit installed (front set at 2.25") + Dobinsons C59-885V rear springs + Raceline Rogue 18X8.5 wheels + Goodyear 275/70/18 Ultra Terrain

    Can you tell me why it would ride rough, and what will be right on the external bump stop. The reason I'm asking is my plan is to set them on the second notch from the bottom.

  6. OME MT64 lift kit installed (front set at 2.25") + Dobinsons C59-885V rear springs + Raceline Rogue 18X8.5 wheels + Goodyear 275/70/18 Ultra Terrain

    Can you tell me if you clipped yours where the clip is in the picture, or one down from that where the arrow is

  7. OME MT64 lift kit installed (front set at 2.25") + Dobinsons C59-885V rear springs + Raceline Rogue 18X8.5 wheels + Goodyear 275/70/18 Ultra Terrain

    Thanks for the information, I’m having mine installed in 3 weeks. If you have a chance can you please measure from the center of the wheel hub to the bottom of the fender flare as I’m trying to level it out so I would like to see what you got in case I have to bring it down a notch. I have the...

  8. OME MT64 lift kit installed (front set at 2.25") + Dobinsons C59-885V rear springs + Raceline Rogue 18X8.5 wheels + Goodyear 275/70/18 Ultra Terrain

    Nicely done! Can you tell me which clip setting you used on the front to achieve the 2.25” lift.

  9. Stock Height Measurements?

    Can someone please provide me with stock height measurements from center hub to bottom of fender flare, Front & Rear, for a TRD Off Road 4WD , non Hybrid model.
  10.

    CUTTING EDGE SR5 build - 285/70/17 KO2's on Black Rhino Bahari -10 Offset Wheels + Level Lift

    Thank you, Looks very nice!!
  11.

    CUTTING EDGE SR5 build - 285/70/17 KO2's on Black Rhino Bahari -10 Offset Wheels + Level Lift

    Can you tell me if you raised it 1.5" or used the shim and spacer to take it to 2" of lift.
  12.

    TRD Sport on 1" Lift + 18" TRD Pro Wheels + 275/70/R18 Nitto Terra Grappler G3 Tires

    Looks nice! Would you say the 1" ReadyLift gave you a level look or does it still have some rake? If possible, can you measure from the center of the hub to the bottom of the fender flare on both front and rear and provide me with the measurements as I'm going to install the same level kit, and...
  13.

    TRD Sport on 1" Lift + 18" TRD Pro Wheels + 275/70/R18 Nitto Terra Grappler G3 Tires

    Nice set-up! I have a question, did the ReadyLift 1" Leveling Kit give you a perfect level from front to rear measuring from center hub to bottom of fender flare or does it still have some rake to it. The reason I'm asking is I jacked up mine in the front and it seems that 2" gives you exact...
  14.

    2" Rough Country Level kit + Nitto Terra Grappler 33s 275/70r18 tires installed on TRD Off-Road

    Looks great!! I'm looking for the same set-up and look. Can you confirm that you used the Rough Country Level Kit strut spacer and the strut shim to achieve 2" lift or just the spacer.

  15. Installed on SR5 no lift: 285/70/17 Wildpeak AT4W tires on +25mm Wheels (Icon Alloys Recon SLX 17x8.5)

    Thank you for the pic's, that's exactly what I'm looking for!
See more



Top