Search results

These are still available and much cheaper than takeoffs from ebay or the dealership.

Land Cruiser front skid plate installed. Should be more than adequate for my needs.

I gave the Covercraft UVS 100 Premier a shot, but after a test fit I could tell it was going to be a a pain to deal with. The vertical fit was extremely tight and the horizontal fit left gaps on the edges. Not worth the high price and it was returned to Amazon. I ended up with a Heatshield...

Kearns is approximately 9 miles, give or take depending on the actual location in Kearns. They are the OEM 17” wheels off my SR5.

I have 3 single 2026 SR5 takeoff wheels for sale in Salt Lake City. Perfect condition. Removed at 27 miles. Center caps, valve stems, and lug nuts included. Perfect for a matching spare. Local pickup only. $80 per wheel.

Nice ride! Which snap ring settings did you use for the coilovers? How do the CV boots look?

OP, did you swap out the center caps on the 703s?

The parts prices are very good (get online and see for yourself), but the hourly labor rate seems to be sky high. Shop around and see if its fair for your locale. I wouldn’t expect a shop to bill less than 6 to 8 hours for a full suspension swap with UCAs. They might get it done it less time...

Any more pics of this setup, OP? Looks good!

It sounds like 4WD might not have fully engaged at first. Was the indicator light solid or flashing when you were sliding around?

The fact that the strap exists really highlights the lack of forethought that was put into the second row design. Seems like a quick fix from a concept vehicle that was never addressed before final production ramped up.

What's the issue with your fender flares?

Nice to hear from a modded 5th gen owner. I’m in the same boat and trying to decide which 6th gen trim to go with. Also, good luck stopping at tires on the new ride. 🙃

No need to ask AI about this. 🤦🏻‍♂️ You can look up the approved rim widths on Falken’s (or any manufacturer’s) website. OP’s 275/70/17 is fine for 7-8.5” wide wheels. The problem with going wider on SR5 wheels (285) is that you need minimum rim width of 7.5”. People are mounting 285s on SR5...

Very nice!

I was about to start a similar thread. Aside from the weight penalty of 275/70/17, it seems like the best option if using the 17” SR5 wheels and you want to upsize. 265s still leave a lot of room in the wheel wells. 285s shouldn't be mounted on a 7” wide wheel per most manufacturer specs...

I'm coming from a 5th gen have no problem fitting 180cm skis in the back with the driver side rear seat folded forward. They just need to be placed at an angle. The 6th gen design has me concerned that this might not be an option since the entire seat folds forward, not just the bottom half...