-
🙋🏻♂️ 2025-2026 4Runner Owners (Delivered) List: 👉 Add Yours Here!
📋 2025-2026 4Runner Allocations List (Nationwide): 👉 See The Daily Updated List Inside!
Sponsored
Rotor-RPM's latest activity
-
Good tires, decent ground clearance, and a 2-speed transfer case covers probably 95%+ of consumers' 4WD needs, for those that ever even... -
Rotor-RPM reacted to NotApplicable's post in the thread Looking at getting Platnium Trim, need some thoughts on eventually turning it into an offroader with
Like.
In my opinion this take is wrong. You have to do very little to the Limited/Platinum to end up at an objectively capable off-road rig... -
This is some video from Sunday. I thought I'd share it since it shows off the '25 4Runner on the trail.
-
Rotor-RPM reacted to Desmolicious's post in the thread Offroading Test: TRD Pro vs Trailhunter vs TRD Offroad vs Moab's Hell's Revenge with Like.
To sum up, the TRD Off Road did everything the $20K more expensive Pro and Trailhunter did. :)
-
Rotor-RPM replied to the thread Engine block heater on Gen 6.I have the Toyota block heater. Works great in the -30c we have only dealt with for a bit where I live in Canada. I have gone with the...
-
*all* of it comes from a larger tire(*), a lift won't change the distance between the rear pumpkin and mother earth. (*) unless you...
-
Under body protection is a super easy problem to solve. I have the front protected… no need for the mid/rear yet.
-
I’ll check it out.
-
Rotor-RPM replied to the thread SR5 4WD Off-Road any Issues?.I have taken my SR5 on a bunch of trails and spots that made me nervous for my skill level and 4lo was extremely impressive and got me...
-
Rotor-RPM reacted to Four Runner's post in the thread TRD Pro 6th Gen - First Snow Driving Impressions with Like.
All good up here in Canada. Happy with my Yokohama Iceguard tires, they handle well on icy roads and are very quiet. The sad part is...
-
Rotor-RPM reacted to MikeUtah's post in the thread Differential Fluid Change DIY Guide (Front & Rear Diff) - for 2025+ 4Runner 6th gen with Like.
Great write-up! However, there are differences between the Tacoma and 2025 4runner. Different quantities of oil needed for 6th gen...
-
Rotor-RPM reacted to gerryt's post in the thread Front End clunk solved: adjust the hood stops with Like.
Hey I tried it out, and it fixed it. Drove for about an hour and went on bumpy roads and the metal clunk hasn’t come back. Very happy...
-
Rotor-RPM reacted to VB4Runner's post in the thread My first 4Runner: 2025 ORP (Underground) build with Like.
Hey everyone, Got my ORP back in March and after spending some time with it, decided to make some mods/upgrades. This is my daily... -
Rotor-RPM replied to the thread Front End clunk solved: adjust the hood stops.Dang! Happy it wasn’t a worse situation but that still sounds like it left you in a lurch. Hopefully one of those times in life that is...
-
Rotor-RPM reacted to VB4Runner's post in the thread Front End clunk solved: adjust the hood stops with Like.
Glad it was an easy fix! I wasn’t so lucky when I heard a clunking noise from the driver’s side. Happened on the White Rim Trail...
-
Rotor-RPM replied to the thread Front End clunk solved: adjust the hood stops.Please do gerryt I hope it’s just that simple. VB4 that is something else wow! Hopefully covered under warranty? Still doesn’t help you...
-
Rotor-RPM reacted to gerryt's post in the thread Front End clunk solved: adjust the hood stops with Like.
Mhm. I see well I’ll give this a try and report back thanks again!
-
Rotor-RPM reacted to gerryt's post in the thread Front End clunk solved: adjust the hood stops with Like.
Cool good to know thanks, was it like a metal rattle noise for you? And when adjusting the hood stops did you adjust up or down?
-
Rotor-RPM replied to the thread Front End clunk solved: adjust the hood stops.It was a metallic clunk for sure, I was certain it was the suspension until I figured I should pop the hood and noticed the clunk just...
-
Rotor-RPM replied to the thread Front End clunk solved: adjust the hood stops.Noise never came back! Super quick fix thankfully.
-
Rotor-RPM reacted to OWW's post in the thread Should I get the dealer’s Rust / Ceramic / Leather Protection Package for $2,499? Worth it or skip? with Like.
I’ll book an appointment with krown as soon as I have my vehicle. Is there any recommend product for leather protection? thank you all...
-
Rotor-RPM replied to the thread Should I get the dealer’s Rust / Ceramic / Leather Protection Package for $2,499? Worth it or skip?.I would go with a yearly rust coating approach. Krown is awesome if you are close to a shop that does it and if not fluidfilm is a great...
-
I’m surprised to hear about wind noise from an SR5. With no sunroof.
-
Rotor-RPM replied to the thread Cross bars mpg.I didn’t see any real change, just wind noise.
-
Just got home from picking up my new 6 Gen SR5. Traded in my 23 Tacoma TRD off-road. Unfortunately the tires I ordered didn't arrive... -
Rotor-RPM reacted to Administrator's post in the thread Best All-Terrain A/T Tires in Snow & Ice (Comparison Test Review) with Like.
Here's a great All-Terrain A/T tire test for winter performance in snow & ice. Each tire was tested and rated in: ❄ Snow Handling 🧊...
-
it depends on the environment you will encounter. if you have to deal with ice and compacted snow most of the time studded works. but...
-
Rotor-RPM replied to the thread Studded Winter Tires.I ran Hakka LT3 (non studded) on my Tacoma for a number of winters and they were fantastic. Last winter we had a lot more ice and they...
-
Rotor-RPM reacted to jmc3350's post in the thread This thing is a beast in a foot of snow on icy road with Like.
looks impressive but that doesn’t quite look like a foot of snow
-
Rotor-RPM reacted to brumey's post in the thread This thing is a beast in a foot of snow on icy road with Like.
I thought exactly the same after clicking on the "Title bait" or 1ft of snow. More like 1/4" snow in the second picture. I'd like to see...
-
Rotor-RPM reacted to Black4Runner's post in the thread 2025 4runner TRD Off-Road Premium is useless in the winter (can't fit tire chains) with Like.
Mine came with falken wildpeaks
-
Rotor-RPM reacted to clarkdot7's post in the thread My SR5 Build So Far: Wildpeak AT4W 285/70R17 C1 and 17x8.5 +20 offset wheels (no lift) with Like.
Here is my 2025 4Runner SR5! First ever car I bought new and no regrets so far. Came from the Subaru STI platform and was getting tired... -
Took the SR5 up the blue ridge parkway over the weekend! thought the addition of the bronze TH grille and wheels looked nice in the fall... -
Rotor-RPM reacted to HydeQc's post in the thread Spare tire issue - wear marks on sidewall from rubbing against frame with Like.
Here's my permanent bushfix. :-) I used a windsheild washer container as the material had the perfect ratio of resistence /...
-
How heavy is your trailer? I also came from a Tacoma V6 and have the 4R hybrid. The 4R tows my 2200# boat with ease compared to the...
-
Rotor-RPM reacted to SVIKIS88's post in the thread 2025 4Runner SR5 (stock) on 275/70/17 Falken Wildpeak AT4W - thoughts / impressions with Like.
Stock 2025 4Runner SR5 on 275/70/17 Falken Wildpeak AT4W. It’s awesome how throwing some tires on can change the game. Fall in Michigan...
-
Not sure if this is helpful as you asked about Woolwax and ceramic, but oil undercoating (Krown) does not void any warranty unless the...
-
Rotor-RPM replied to the thread Undercoatings void warranty ?.Specially if you go with something that needs to be reapplied like Krown, fluid film, etc. worst case you can hit the car wash a bunch...
-
Rotor-RPM reacted to kekecarioca's post in the thread Front End clunk solved: adjust the hood stops with Like.
Got to love Toyota using the corkscrew rubber stopper since the 80' (as far as I know), perhaps even longer...
-
Rotor-RPM posted the thread Front End clunk solved: adjust the hood stops in Issues, Repairs, Warranty, TSB, Recalls.Over the past few days I have noticed a clunk in the driver side front end, seemed to sound metallic in nature. Out for a drive today...
-
-
It’s industrial grade ceramic coating. Different from the stuff you put on the exterior of the car. As we know from prior generations...
-
Rotor-RPM replied to the thread Undercoating thoughts?.I drove it up on ramps, little extra room that way!
-
Spent part of today spraying about 3/4 of the underbody with the Fluid Film. First off, I was impressed with just how much coverage you...
-
Rotor-RPM reacted to dirtwheeler's post in the thread Removed the steps (running boards) and air dam chin spoiler with Like.
I took the chin and steps off this evening. This just takes a few minutes. On the chin (I think its called an air damn), there are nine...
