-
🙋🏻♂️ 2025-2026 4Runner Owners (Delivered) List: 👉 Add Yours Here!
📋 2025-2026 4Runner Allocations List (Nationwide): 👉 See The Daily Updated List Inside!
Sponsored
romik's latest activity
-
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.Thanks for sharing your specs.
-
I had mine installed yesterday. I decided to go with position 5 (2.2 in), and a .75 poly spacer on the rear coils. It is very close to...
-
This This is almost exactly what Bilstein is installing for me as we speak, but I'm running the Readylift 1" spacer in the rear...
-
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.I didn’t want to edit the post, but I had to because my main focus was to get alignment specs and hear opinions from others with a...
-
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.Apparently, I went to one of the best alignment shops in the city, and they mentioned that this was the best they could do. They said...
-
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.Lots of variables, there is no specific height limit because a lot of factors are involved, such as rim size, tire size, how you achieve...
-
romik replied to the thread Silver SR5 (7 seater) Build- Bilstein 6112 / 6100, Westcott Designs rear pucks, Method 703 +35 offset, 285/75R17 BFG KO3.Good job and congrats. -
romik reacted to BlueFinTunaGuy's post in the thread Silver SR5 (7 seater) Build- Bilstein 6112 / 6100, Westcott Designs rear pucks, Method 703 +35 offset, 285/75R17 BFG KO3 with
Like.
So after a month of having my 4Runner and reading about everyone's awesome builds. I planned out a build Build - 2026 SR5 (7 seater) in... -
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.im at 2.2 inch, rear 0.8 puck.
-
romik reacted to boisetom's post in the thread 285/70/17 Tires (33's) biggest tires that fit on stock SR5. No lift & no rub (photos) with Like.
Wow. Looks good. I am doing the +35 offset and the same wheels next week. Wow. YOU are so right. I put the 285/70r17 on my stock...
-
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.That’s right. For your setup, I would recommend a 1-inch ReadyLIFT spacer for the rear if you like a level stance. And i would avoid any...
-
romik replied to the thread 2.75" front lift with Bilstein 5100 + 6100 rear shocks + 285 AT3 tires + Fuel Off-Road Spur 17” wheels +25 offset.Could you please share you alignment specs? -
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.Center cap wouldn’t be very accurate, so I went with the lower cap/point since I can hook the measuring tape there. It’s 24 1/8 inches.
-
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.275/70/17
-
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.5100 dedicated for 6Gen. Stock springs. I would say its a bit firmer, more controlled, less body roll for sure which i love it, less...
-
romik replied to the thread SR5 Suspension Lift: Bilstein 5100.Front: 24-347464 Rear: 24-347433
-
romik replied to the thread Aftermarket Wheels, Bigger Tires, Lift Kits (Compilation) for 2025+ 4Runner 6th Gen -- Add Yours!.Hey everyone, just wanted to share my truck! Upgraded to Bilstein 5100 front and rear shocks, and I’m really happy with the height and...
-
-
romik posted the thread SR5 Suspension Lift: Bilstein 5100 (2.2" front and 0.8" rear lift) in General Topics.
-
Hey everyone, just wanted to share my truck! Upgraded to Bilstein 5100 front and rear shocks, and I’m really happy with the height and...
-
-
romik reacted to Archer's post in the thread Failed State Inspection because of OEM Premium Taillights with Like.
Once had a cop pull my over in my Dodge 1500 and said I had illegal lift blocks in the rear. They were OEM but he argued with me that...
-
romik reacted to mfoga's post in the thread Failed State Inspection because of OEM Premium Taillights with Like.
I know but that sounded like CA level BS.
-
romik replied to the thread Failed State Inspection because of OEM Premium Taillights.Seriously, what kind of stupid person did you run into? And I was thinking mine is totally fine!
-
-
romik replied to the thread Westcott Designs lift 2.5" front, 0.75" rear -- anyone install this on factory shocks??.Some claim that the front suspension sits lower after settling due to the engine weight and the fact that the front is generally heavier...
-
romik reacted to cuhhhris's post in the thread Westcott Designs lift 2.5" front, 0.75" rear -- anyone install this on factory shocks?? with Like.
Hey! Apologies for such a late reply, mine sits pretty level as far as I can tell. I also don't tow anything ever or have anything heavy...
-
romik reacted to HVLA's post in the thread Bilstein 5100 suspension lift kit installed on a Limited with AVS - review (ride quality improved) with Like.
You should always get an alignment any time you take the suspension apart.
-
romik replied to the thread Bilstein 5100 suspension lift kit installed on a Limited with AVS - review (ride quality improved).You definitely need an alignment. Remember, Bilstein shocks are longer, and the way they change the suspension geometry is more...
-
romik replied to the thread Bilstein 5100 suspension lift kit installed on a Limited with AVS - review (ride quality improved).Could you share your alignment specs, especially since you haven’t changed your UCA?
-
romik replied to the thread Westcott Designs lift 2.5" front, 0.75" rear -- anyone install this on factory shocks??.Thanks for the info and your contribution to the community. I commented on one of your YouTube videos yesterday and got a quick...
-
romik reacted to 828findadventure's post in the thread Westcott Designs lift 2.5" front, 0.75" rear -- anyone install this on factory shocks?? with Like.
Still sits level, but with a heavy weight in the rear, it squats a tiny bit. My remedy for that is Air Bags, which I am installing soon.
-
romik replied to the thread Westcott Designs lift 2.5" front, 0.75" rear -- anyone install this on factory shocks??.Hi, now that more than a year has passed, do you think the front suspension sits a bit lower? Do you have any rake, or is it perfectly...
-
romik replied to the thread Suspension front lift to level my SR5.yes
-
romik replied to the thread 4runner came with scratch on interior trim, what would you do?.
-
romik replied to the thread 4runner came with scratch on interior trim, what would you do?.Well, when I got my brand new car, there were already some visible scratches on the paint. I even spoke with the sales manager, and he...
-
romik replied to the thread Suspension front lift to level my SR5.You’re right, actually that was the best answer so far, and thank you for that. And yes, they are out. The screenshot I posted is from...
-
romik reacted to 828findadventure's post in the thread Suspension front lift to level my SR5 with Like.
OK, here is a real answer. I had these on my 21 Tundra to level it out. I had the fronts set on the top perch to get the most lift. On...
-
romik replied to the thread Suspension front lift to level my SR5.Thx for sharing.
-
I think 2 inches in the front might be slightly high based on the lift I just did- not 5100’s though. I had 5100’s on my 4th gen and...
-
My vote, bilstein6100 leveling kit front and back.
-
Just saw a picture of someone with this it cracked his control arm. I don’t recommend what you’re saying at all.
-
I added 275/60r20 tires to my stock 4R and by my measurement the front is 1.25” higher than the rear. I would suspect by lifting the...
-
romik replied to the thread Suspension front lift to level my SR5.Its well over by budget but i really like em, thanks for sharing.
-
romik replied to the thread Suspension front lift to level my SR5.Well, the short answer would be performance and less body roll. I’m not answering in a way that some people come in and change the...
-
-
Hi guys, Has anyone upgraded their suspension on the 6th gen using Bilstein 5100s and used the adjustable perch to level the vehicle...
-
