Recent content by mfoga

Do you have the aux switches? If so on the low amp pigtail there is a wire that will work

Maybe it seems the same Tacoma is the same part but different part number and if they made a truck in that color you can get it. I had to order Tacoma part to get the ice cap color. There is a thread that had color codes somewhere and that was how I found it.

No there are not they don't the info posted either and in my experience have less information..

The scary part is 3 months later they are still having to “redesign“ the bracket. It was listed on site with molle panels and that was what I ordered. But even then before I bought this I felt like I have had to ask 1000 questions about every product, almost none of these companies seem to be...

Wait they had to redesign them for you too? I sent photos showing it didn't work with molle panels and that it doesn't fit the spacing for awning. I ended up drilling a new hole to fix spacing after they sent a revised mount for molle panel(they acted like this was the first time and that was...

I installed same rack and fairly certain in the install video they tell you to make sure there is a gap. I laid a microfiber cloth folder a couple times in front , back and middle of rails. Then got everything really tight and removed the cloths. I have very little gap in front but it's not...

The wiper I kind of knew because omy previous car I had to do that to pull wipers off windshield because they were tucked under the hood. I started to find it worked on a lot of cars even that didn't need it like the 4runner.

I looked at them but I think when I remember looking it was cheaper to buy the OEM ones from Toyota as they come in a paint code . I saw a Tacoma with the color matched ones in the Icecap white and decided I like the matte black over the half white and black ones.

The most useful thing I didn't know about was the fact you can stop the liftgate with pushing the open button again.

@OffRoadUSA.com why do we keep getting posts about products that can't be installed on 6th gen?

https://hoisterdirect.com/store/index.php?route=product/product&path=103&product_id=100130

The westcott brackets attach to the side rails of the rack for the awning. The tent for me is using the Sherpa tall mounts (1" above cross rails). I used 8 mount 4 at attached to rail near the center and stays mounted to the top tent. You can see it hanging off bottom of the tent. There are...

It attaches to the rack. I have seen some that say it can attach to side of tent but that would require a heavy duty side of tent IMO. I don’t have the tent on all the time I can install in about 30 minutes but the swing stays on full time. Would get pulled down for long trip where it won’t...

I went with openroad 4wd tent due to was one of my the lightest ones I could find at the time couple years ago. I wanted something with simple open and close too since I would mostly be used for camping in winter chasing snow and wanted something that can close up easiest if covered in snow.

The awning is not integrated It is separate. They make both you can Save money buying both together.