-
🙋🏻♂️ 2025-2026 4Runner Owners (Delivered) List: 👉 Add Yours Here!
📋 2025-2026 4Runner Allocations List (Nationwide): 👉 See The Daily Updated List Inside!
Sponsored
cgrhyne49's latest activity
-
cgrhyne49 reacted to RSPNDCO's post in the thread 2026 SR5 build: 3.5" Rough Country Lift w/ M1 shocks, 295/70/17 Gladiator X Comp M/T tires, stock wheels, 1" spacer with
Like.
2026 SR5 3.5" Rough Country Lift Kit with M1 shocks 295/70/17 Gladiator X Comp M/T tires Stock wheels 1" in spacer -
cgrhyne49 replied to the thread Bilstein 5100 with OME 3344 rear coil springs - installed photo.I would think so, should probably sit about perfectly even. The 3343’s were supposed to be 1.5-2”, so if they’re on the 1.5” end of...
-
cgrhyne49 replied to the thread Bilstein 5100 with OME 3344 rear coil springs - installed photo.You could add a spacer in the rear or go with something like the Icon spring that gives .75” of lift and set the front at the 1.65”...
-
cgrhyne49 replied to the thread Bilstein 5100 with OME 3344 rear coil springs - installed photo.Didn’t pay attention on the alignment numbers, but did see green across the board. The issue I ran into there was finding a shop...
-
cgrhyne49 replied to the thread Bilstein 5100 with OME 3344 rear coil springs - installed photo.Looks like 22.25” and the rear is 23” even.
-
cgrhyne49 replied to the thread Bilstein 5100 with OME 3344 rear coil springs - installed photo.Noticeably better. It felt like the stock rear suspension was either bottoming or topping out and was pretty harsh. This combo solved...
-
cgrhyne49 posted the thread Bilstein 5100 with OME 3344 rear coil springs - installed photo in Suspension / Chassis / Steering.Upgraded to the Bilstein 5100 shocks. Fronts running factory springs at 2.2” clip (#5) and rears on 5100’s with OME 3344 rear coil...
-
