yes. I swap the grille myself. It takes lots of patience and time consuming. Only three electrical connectors need to be unplugged , then you remove the bumper => remove the grille shutter => remove the upper mustache => take lots of time to push out the clips that holding the grille and the...
yes. You can reuse the TPMs by unscrewing them from behind, but you still need to get the new valve stems since they are not removable from the old wheels.
the one I have is TRD pro grille
TRD PRO GRILLE PART NUMBER: 53101-35170
It’s in gloss black with grey letter
TrailHunter GRILLE PART NUMBER: 53101-35160
It’s in matte blwith bronze letters
Yes. I installed by myself! It took a lot of patient and time consuming. Need to remove the whole bumper , then remove the grille shutter , then the upper grille mustache before you can remove the grille. It takes at least 2hours+
those grille from this link is not even the right shape of the 6gen grille
if you decide to change the Pro lower grille as well , you need to relocate your camera with extended wire harness, and have Toyota recalibrate your camera. I don’t want to go through this headache yet
I’m 100% positively sure the 2024+ Tacoma wheels are same lug pattern & hub bore size with 2025 4Runner with Zero add-on or modifications needed , because I’m currently using a set of 2025 Tacoma TRD Pro wheels. They are the same wheels
yes. There is set of new 12 bolt included. Abut anyway Your 4Runner already has bolts on all those mounting holes for the step bar, I just reused them that originally on the car.