Search results

Same, I just used a wire feeder instead of a zip tie but same concept. Just folded the rubber channel about half way and snaked the metal line through / pulled the connector out and ran it along with the stock wires.

Excuse the dirt. But I drilled the camera into the plastic part under the spoiler and then on the same part drilled another small hole behind (where it tucks up 2nd photo in from the underside) then just ran it through the channel with the other wires from the hatch into the vehicle.

Hey guys! Figured id reach out for some advice on this. I installed an auxbeam AR800 in the 4runner the other day and received my ditch lights from auxbeam and brackets from CBI so I am tackling the project this weekend of installation. *Forewarning I am learning as I go here and do not have a...

Has anyone mounted a switch panel under the hood yet? If so how are you doing it? and does anyone know if there is a bracket attachment that is made? Or if the Tacoma one works?

Yep, im a big dumb dumb and was trying to get the wrong thing off for the plastic. I did end up removing the entire spoiler which was 2 more screws and 2 clips and was able to get everything installed. I ended up installing the camera more towards the middle than you have you have yours but will...

I am having a crazy time trying to get the spoiler / back plastic off. Does the black plastic on the outside just pop off with clips? Or do I need to remove the spoiler? Ive gotten a few things to loosen up on the plastic itself but going into the corners feels like its gonna snap. Also I am...